Cleaning Whirlpool Bathtub without Harsh Abrasives





When you have the job of cleaning whirlpool bathtub surfaces, you want to clean them without using harsh abrasives. It is best to use a solution that will not dull the finish. The goal is to keep the whirlpool jetted bathtub cleaning easy and quick. You have to take special care when cleaning the jets and the other fixtures on your bathtub model for the best results. How will you clean whirlpool bathtub jets, tub, and fixtures?

Cleaning the Jets

The best way for jetted whirlpool bathtub cleaning is with a bucket of hot water, dishwasher cleaning tablets and twenty minutes of time. You run hot water into the bucket and dissolve the tablets. Once the tablets are dissolved, plug the drain in the bathtub and add the hot water with the tablets. Then run the water in the tub until the water is just above the jets. Turn the jets on and run twenty minutes. Turn off the jets and drain. Use a damp cloth to pick up any loose dirt in the tub, then plug the drain again and run hot water to just above the jets. Turn on the jets and run for ten minutes.

Cleaning Whirlpool Bathtub Finish

Use something that is not so harsh on the finish. Something that will remove any film, but something that will not be so abrasive will work well. Scrubbing Bubbles works great for whirlpool jetted bathtub cleaning. You want to use a soft sponge with the cleaning product. If you have a stubborn film, the dishwashing tablets should have loosened some of it when you cycled the jets.

The idea is to keep the whirlpool bathtub clean so that you can enjoy a relaxing and enjoyable spa treatment. If you would use something that is abrasive, you might not be able to rinse the grit out of the tub and this will be waiting for you when you use the tub after cleaning it.

Clean Whirlpool Bathtub Fixtures

The fixtures should be cleaned with the same product you use on the tub, or you can use baking soda to remove any film and water spots. The baking soda works very good for cleaning brass fixtures or silver plated fixtures. If you were to use something such as Comet on the fixtures, you might have a film if it is not rinsed enough. It can also cause the fixture to dull over time.

When you are cleaning whirlpool bathtub fixtures, jets and the finish, you must make sure that you get everything clean, but you want to take care in how this is done. You always want to make sure that you get the jets clean to prevent any bacterial growth in the tub. It is always important to follow manufacturer's directions for cleaning whirlpool bathtubs, but the dishwasher tablets work the best. Once you see all the dirt that can come out of the jets, you will understand why you need to clean them once a month or every other month depending on how often you use the whirlpool bathtub.